JBL (VRX918SP) 18" High Power Powered Flying Subwoofer

New

JBL (VRX918SP) 18" HIGH POWER POWERED FLYING SUBWOOFER.

The VRX918SP is a powered, suspendable subwoofer system containing a 2268FF neodymium magnet, patented Differential Drive®, 18" woofer in a front-loaded, vented enclosure.

More details

This product is no longer in stock

$1,999.99

Add to my wishlist

Shipping Rates

More info

The VRX918SP was designed specifically for use in arrays with the VRX932LAP Line Array speaker and VRX-AF Array Frame. In addition it may also be used in arrays consisting entirely of VRX918SP subwoofers.

 

FEATURES:

  • Built-in JBL Drivepack® DPC-2 amplifier module designed by Crown provides 1500 Watts of peak Power.
  • DSP based resident input module provides system optimization, EQ and crossover functionality.
  • 18 inch, 2268FF dual voice coil, neodymium magnet Differential Drive® woofer for high-power capacity and light weight.
  • Integral rigging hardware for simple connection of enclosures and optional array frame.
  • 20 mm threaded pole socket for solid, secure satellite speaker mounting.
  • Large port area for reduced distortion

 

SPECIFICATIONS:

Power Rating   :   1500 Watts Peak
LF: Dual-Bridged Technology™, Class D

 

Frequency Range   :   31 Hz – 220 Hz

 

Dimensions
(H x W x D)
  :   508 mm x 597 mm x 749 mm 
(20.0 in x 23.5 in x 29.5 in)

 

Frequency Response   :   34 Hz – 220 Hz

 

Maximum Peak Output   :   126 dB SPL at 1m

 

Bandpass Nominal Impedance   :   LF: 2 x 2 ohms

 

LF Driver   :   1 x JBL 2268FF 457 mm (18 in) dual voice coil 
Differential Drive® woofer with neodymium-magnet

 

Audio Input Connector   :   XLR with loop through

 

User Controls   :   Input Attenuator (0-16 dB)
Selectable 80 Hz or 120 Hz Low Pass 
80 Hz High-Pass enable/disable for XLR loop thru.

 

Signal Processing   :   DSP based, resident in Input Module

 

System Management   :   DSP based limiters for mechanical and thermal protection

 

AC Power Operating Range   :   90-132 VAC or 216-264 VAC, 50/60Hz

 

AC Line Voltage   :   User selectable: 120V/240V (-15%, +10%)

 

AC Input Connector   :   Neutrik PowerCon (NAC 3MPA)

 

AC Loop Through Connector   :   Neutrik PowerCon (NAC 3MPB)

 

AC Current Requirements   :   6A per system at 120V, 3A per system at 240V

 

Enclosure   :   18 mm birch plywood.

 

Suspension / Mounting   :   Optional VRX-AF line-array frame kit or 10 mm forged eyebolts

 

Finish   :   Black DuraFlex™ finish

 

Grille   :   Powder coated, black, 16-gauge perforated steel with 
acoustically transparent foam

 

Net Weight   :   38.5 kg (85 lb)

 

Optional Accessories   :   VRX-AF array frame
SRX718S-CVR: Pull-over padded cover (works with WK-4S)
SS4-BK adjustable satellite speaker pole WK-4S Caster kit

Reviews

No customer comments for the moment.

Write a review

JBL (VRX918SP) 18" High Power Powered Flying Subwoofer

JBL (VRX918SP) 18" High Power Powered Flying Subwoofer

JBL (VRX918SP) 18" HIGH POWER POWERED FLYING SUBWOOFER.

The VRX918SP is a powered, suspendable subwoofer system containing a 2268FF neodymium magnet, patented Differential Drive®, 18" woofer in a front-loaded, vented enclosure.

Write a review

17 other products in the same category: